Q:2) a) If this uunit in question 1 is initially operating at Pmp.u=Pep.u=0.7 pe

Q:2) a) If this uunit in question 1 is initially operating at
Pmp.u=Pep.u=0.7 per unit w = wsyn
and d=12 degree when fault reduces the generator electrical power output by
70%.Determine the angle d five cycles after the fault commences. Assume that
the accelerating power remains constant during fault. Also assume that Wp.u(t)=
1.0 in the swing equation. B)Repeat part A)for a bolted three- phase fault at
the generator terminals that reduces the electrical power output to zero. Compare
the angle with that determined in part A.
Q:3
A 60Hz synchronous generator has a transient reactance of
0.2 per unit and an inertia of 5.66MJ/MVA. The generator is connected to an
infinite bus through a transformer and a double circuit transmission line. Resistances
are neglected and reactances are expressed on a common MVA base and are marked
on a diagram. The generator is delivering a real power of0.77 per unit to bus 1.Voltage magnitude at
bus 1 is 1.1. The infinite bus voltage is V=1.0 p.u. Determine the generator
excitation voltage and obtain the swing equation in the form of ;Hd2f0dt2=
Pm-PmaxsinThe machine of question 2 is
delivering a real power input of 0.77 per unit to the infinite bus at a voltage
of 1.0 p.u. The generator excitation voltage is E=1.25 p.u.A)A
temporary three phase fault occurs at the sending end of one of the
transmission lines. When the fault is cleared both lines are intact. Using
qual area criterion determine the critical clearing angle and the critical
fault clearing time.B)A
three phase fault occurs at the middle of one of the lines the fault is
cleared and the fault is isolated. Determine the critical clearing angle.

You can place an order similar to this with us. You are assured of an authentic custom paper delivered within the given deadline besides our 24/7 customer support all through.